To apply the Windown Film we should step by step as below:
A. Install in accordance with manufacturer's instructions.
B. Cut film edges neatly and square at a uniform distance of 1/8 inch (3 mm) to 1/16 inch (1.5 mm) of window sealant. Use new blade tips after 3 to 4 cuts.
C. Spray the slip solution, composed of one capful of baby shampoo or dishwashing liquid to 1 gallon of water, on window glass and adhesive to facilitate proper positioning of film.
D. Apply film to glass and lightly spray film with slip solution.
E. Squeegee from top to bottom of window. Spray slip solution to film and squeegee a second time.
F. Bump film edge with lint-free towel wrapped around edge of a 5-way tool.
G. Upon completion of film application, allow 30 days for moisture from film installation to dry thoroughly, and to allow film to dry flat with no moisture dimples when viewed under normal viewing conditions. 
To get Window Film Professionally Installed?
Remember to remove all dirt and debris by cleaning your windows and frames first with special attention to possible debris under the molding.Carefully remove any paint or putty on the glass.
Window Film’s patented adhesive is already on the window tinting film and is protected by a clear liner.
The liner is removed and the exposed adhesive is sprayed lightly with a baby shampoo solution to ease installation.
No harsh chemicals are used. Then squeegeed to the glass and trimmed, leaving a small 1/16″ to 1/8” clear border around the frame.
This border is necessary for the proper installation of all window films. Usually, this border is imperceptible.
0 comments:
Post a Comment
Write your comment